Specifications

Voltage AC/DC

AC/DC 24 V

Power consumption (running)

4.5 W

Power consumption (holding)

2 W

Power Consumption For Wire Sizing

6.5 VA

Connection Supply Control

Cable 1 m, 4x 0.75 mm²

Torque

40 Nm

Control type

DC 2...10 V

Direction Of Motion Motor

selectable with switch 0/1

Manual override

With push-button, can be locked

Angle of rotation

95°

Running time (motor)

150 s / 90°

Mechanical interface

Universal shaft clamp reversible 12...26.7 mm

Protection category

IP54

Degree Of Protection NEMA

NEMA 2

Enclosure Type

UL Enclosure Type 2

Ambient Temperature

-30...50°C [-22...122°F]

Versatile in Performance and Function

Belimo non fail-safe damper actuators are designed for use in a wide variety of HVAC damper applications. With our comprehensive torque range from 2 Nm to 40 Nm and the ability to direct mount on standard damper shafts or jackshafts, these solutions are ideal for controlling dampers found in AHU, PAU, VAV terminal units, fan coil units, and unit ventilators used in hospitals, schools/universities, and data centres.

• Universal clamp to fit it different shaft sizes to help reduce inventory

• Clear, vibrant orange indicator to quickly check damper position

• Accessible manual override button to help you pre-tension damper blades quickly

• Direction of rotation switch to allow the actuator travel to match the control signal output

• Simple, direct coupling to reduce labour costs

• Mechanical end stops to adjust the angle of rotation for added installation flexibility

• Offer minimum torque guaranteed over entire specified operating range; no loss in performance due to temperature, supply voltage or speed

• Electronically protected against overload which decreases maintenance cost

• Provide brushless DC motor for added accuracy and controllability

• Offer higher efficiency with lower power consumption to save energy cost