Description
Cost-effective flange load cell made of aluminum with an anodized surface
Compatible with the PD 21/22 standard series
Position-independent, straightforward installation thanks to the range of different mounting options, e.g. flange bearings, pedestal bearings, inner/outer fastening
Highly reliable in operation thanks to overload protection up to 10 times the nominal measuring force
For measurements in a horizontal direction, the weight of the roller does not affect the measured result
Technical Data
Accuracy class | 1 |
Nominal characteristic value (sensitivity) | 1 m V/V |
Combined error | < 1% |
Characteristic value tolerance | 0.2% |
Measuring principle | Full bridge strain gauge |
Nominal resistance of the strain gauge bridge | 700 Ohm |
Bridge supply voltage | |
Nominal value | 10 V |
Max. permissible value | 14 V |
Mechanical stop | 1.8 to 2.4 FN dep. on type |
Operating load | 1.8 to 2.4 FN |
Limit load | 10xFN |
Nominal measuring deflection | 0.1 to 0.25 mm depending on type |
Nominal temperature range | -10 °C to +60 °C |
Operating temperature range | -10 °C to +90 °C |
Temperature coefficient | ±0.5% / 10 K (characteristic value) |
±0.5% / 10 K (zero signal) | |
Protection class | IP 54 |
Max. permissible axial transverse force | 1xFN |
